Veneer wood door

Wood Veneer is what?
Basically for everyone understandable, natural wood veneer is, however, were split from natural wood, wood veneer thickness only 1 to 2 cups ice is more, a natural tree if split up it was a lot of wood veneer. If thick woods 300mm 2500mm wide and 200mm long, it will slice off about 1500 - 3000m2 wood veneer, depending on the type of loss. After being sliced, wood veneer pasted into all kinds of different industrial wood remains as MDF, Plywood wood (wood plywood), planks (joinery), to make the furniture. Do sliced from natural wood veneer surface should be no different from the natural wood.

Advantages of Wood Veneer

Reasonable low price, a natural wood sliced into veneer wood can produce a lot of furniture, wardrobe, cupboard veneer bep..go against warping, termites and surface brightness (due selected wood), can be matched twill decorative, horizontal pattern, vertical pattern, so the island can run just sink, depending on the type ... that retains the beauty and its contemporary. If using core planks (boards had) to create length, width. Wood veneer is turned into completely natural wood and is very durable, certainly, beautiful but cheap price.

Wood veneer Cons:

Due to the laminate wood core should not waterproof veneer, prone to chipping, if you have to move more into finished products is or is damaged, cracked, so the wood veneer is used however many people have in place throughout the year but not be flooded, and less to move. In modern countries such as Europe, America, or some modern countries in Asia, the use of wood veneer to manufacture interior products made from 30-40 years ago, when they were aware of the forest day exhausted, they found that veneer has many advantages but save their habitat, save landslides and warming of the earth so they switched to much, so why are we do not follow them, we should not ruin our environment.